SMD screen P2.9 P3 LED indoor display

SMD Screen P2.9 P3 LED Indoor Display ScreenINDOOR P3 SMD 3IN1 TECHNICAL PARAMETERS  Item ParameterUnit Module Model NumberHM-PH3-32S Module size192mm*192mm Pixel pitch3mm Pixels Density111111dots/m2 Pixel configuration1RGB 3in1 Package modeSMD2121 Pixel resolution64dots(W)*

Featured Products

SMD Screen P2.9 P3 LED Indoor Display Screen
SMD Screen P2.9 P3 LED Indoor Display Screen

INDOOR P3 SMD 3IN1 TECHNICAL PARAMETERS
  Item Parameter
Unit Module Model NumberHM-PH3-32S
 Module size192mm*192mm
 Pixel pitch3mm
 Pixels Density111111dots/m2
 Pixel configuration1RGB 3in1
 Package modeSMD2121
 Pixel resolution64dots(W)*64 dots(H)
 Drive typeConstant currant drive
 Scan mode1/32S
Port typeHUB75
Brightness of white balance≥1500cd/m
LED Display CabinetDimension576mm*576mm
Power supply5V60A*1PC
Pixel per cabinet192*192
Best viewing distance3M~18M
Best viewing angle160°(W) 120°(H)
Temperaturestorage:-35ºC~+85ºC
working:-20ºC~+50ºC
Relative humidity10%-95%
PowerWorking voltageAC110~220V±10%
Average Power consumption≤300W/m2
Max.Power consumption≤600W/m2
Current≤20mA(single LED)
Control SystemCPUPentium4 or above
Operation systemWIN98/2000/NT/XP/WIN7
Control methodSynchronous and asynchronous
Main Technical ParameterDriving deviceConstant drive IC
Refresh frequency≥1200HZ
Grey scale/colors4096gray level/16.7M colors
MTBF≥100000hours
Power switchAutomatic switch
Display Mode≥800*600/1024*768
SMD Screen P2.9 P3 LED Indoor Display ScreenSMD Screen P2.9 P3 LED Indoor Display ScreenSMD Screen P2.9 P3 LED Indoor Display Screen

SMD Screen P2.9 P3 LED Indoor Display Screen
SMD Screen P2.9 P3 LED Indoor Display Screen
SMD Screen P2.9 P3 LED Indoor Display ScreenSMD Screen P2.9 P3 LED Indoor Display Screen


SMD Screen P2.9 P3 LED Indoor Display Screen
SMD Screen P2.9 P3 LED Indoor Display Screen

FAQ
Q1: What is the warranty for the led display?
A1:Normally we will provide customers 2 -3 years warranty and long term technology support and after-service.
Q2: How do you ensure the quality
A2: We get three QC processes:1.For raw materials;2.During the half of production; 3.Final QC test one by one after aging 12 hours.
Q3: How to do if any quality problems on our side in the warranty time?
A3: In usually every screen we will be ready more extra led screen modules as spare modules, if some modules happen fails, you can replace the fail modules by our spare modules,
When all the spare modules use out, You can send back these modules for us to repair, and we will send to you after repair and testing&aging well
.
Q4: OEM OR ODM accepted?
A4:Yes,we can do OEM & ODM,logo on the light or package both are available.
Q5: Which refresh rate for the led display you can provide?
A5:the maximum refresh rate can be achieved more than 3840Hz. Also we can provide the normally refresh rate if you need.
Q6:  How many days will samples be finished?And how about the mass production?
A6: Generally 5-7 days for samples making. The leading time of mass production will depend on the quantity.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours