HY-9400 Silicone Potting
Description
HY-9400 RTV-2 Silicone Potting is a newly insulating material silicon of silicon compounds.
It cures with no heat, no corrosion and little shrinkage. It can be applied to the sealing and pouring of various electronic components, and then forming insulation system.
Application
HY-9400 is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
Technical Parameters
Operation instructions
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Weight Ratio: part A: part B = 1:1
3, Deaeration the mixture under 0.08 MPa for 3 minutes.
4, The temperature influences the curing time: When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.
Warm tips :
1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.
Condensation silicone which not completely cured or organic tin compounds
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Pewters solder flux.
2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.
3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix 9301 evenly before using, it does not affect the performance.
Package
20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B
200KG/drum packing for part A +200KG/drum packing for part B
Shelf life
1. Eighteen(18) months from date of shipment when stored at 24C in original unopened packages.
2. This kind of product is non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.
Contact us:
James
Tel:008618988789546
Description
HY-9400 RTV-2 Silicone Potting is a newly insulating material silicon of silicon compounds.
It cures with no heat, no corrosion and little shrinkage. It can be applied to the sealing and pouring of various electronic components, and then forming insulation system.
Application
HY-9400 is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
Technical Parameters
| Model | Color | Viscosity (cps) | Hardness (A°) | Mixing ratio | Operating Time(hr) | Curing Time(hr, 25ºC) |
| HY-9400 | Water clear/ Blue | 1800±800 | / | 1:1 | 1~2 | 6~8 |
Operation instructions
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Weight Ratio: part A: part B = 1:1
3, Deaeration the mixture under 0.08 MPa for 3 minutes.
4, The temperature influences the curing time: When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.
Warm tips :
1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.
Condensation silicone which not completely cured or organic tin compounds
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Pewters solder flux.
2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.
3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix 9301 evenly before using, it does not affect the performance.
Package
20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B
200KG/drum packing for part A +200KG/drum packing for part B
Shelf life
1. Eighteen(18) months from date of shipment when stored at 24C in original unopened packages.
2. This kind of product is non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.
Contact us:
James
Tel:008618988789546